FIAT 350
MAX HP AT ENGINE CRANKSHAFT: 35 at 2,650 engine rpm.
ENGINE: Fiat 8052 diesel, 4-stroke, Direct injection, Water-cooled,
Cylinders = 2, Bore = 100 mm, Stroke =110mm, Displacement = 1728 cm^3.
Operating speed range = 900 - 2,700 rpm, Direct 12 volt electric start
with thermostart.
TRANSMISSION: Type = 6 forward speeds, 2 reverse, synchromesh on 2nd,
3rd ,5th, and 6th gears.
MAX SPEED in 6th gear 24.9 Km/h with 11.2/10 - 28 standard rear tires.
STANDARD TIRES: Front = 6.00 x 16 x 4-ply, Rear = 11.2/10 x 28 x 4-ply.
PTO: Spline shaft diameter = 1-3/8 in. Shaft central between wheels, rotation is clockwise, viewed from rear.
IMPLEMENT ATTACHMENT: Category 1, three-point linkage.
ADDITIONAL EQUIPMENT AVAILABLE: Alternative wheel and tire equipment and weights, linkage drawbar, swinging drawbar, belt pulley, down-swept exhaust,
front tow hook, front weights and frame.
MAX HP AT ENGINE CRANKSHAFT: 35 at 2,650 engine rpm.
ENGINE: Fiat 8052 diesel, 4-stroke, Direct injection, Water-cooled,
Cylinders = 2, Bore = 100 mm, Stroke =110mm, Displacement = 1728 cm^3.
Operating speed range = 900 - 2,700 rpm, Direct 12 volt electric start
with thermostart.
TRANSMISSION: Type = 6 forward speeds, 2 reverse, synchromesh on 2nd,
3rd ,5th, and 6th gears.
MAX SPEED in 6th gear 24.9 Km/h with 11.2/10 - 28 standard rear tires.
STANDARD TIRES: Front = 6.00 x 16 x 4-ply, Rear = 11.2/10 x 28 x 4-ply.
PTO: Spline shaft diameter = 1-3/8 in. Shaft central between wheels, rotation is clockwise, viewed from rear.
IMPLEMENT ATTACHMENT: Category 1, three-point linkage.
ADDITIONAL EQUIPMENT AVAILABLE: Alternative wheel and tire equipment and weights, linkage drawbar, swinging drawbar, belt pulley, down-swept exhaust,
front tow hook, front weights and frame.
