FIAT 580
Brochure
MAX POWER AT ENGINE CRANKSHAFT: 42.92 kW (58 hp) at 2,650 engine r/min.
MAX POWER AT PTO SHAFT: 38.4 kW (51.6 hp) 630 r/min at 2,700 engine r/min.
MAX DRAWBAR POWER: 32.4 kW (43.4 hp) at 2,700 engine r/min.
MAX DRAWBAR PULL: 28.6 kN at 3.6 km/h on 16.9 R x 30 tyres when tractor weighted to 4,178 kg.
MAX CRANKSHAFT TORQUE (Nm): 179 at 1,700 engine r/min.
ENGINE: Fiat 8035, Cylinders = 3, Bore = 103 mm, Stroke = 110 mm, Displacement = 2,750 cm3, Compression ratio = 17:1.
TRANSMISSION: Type = constant/synchro.
STANDARD SPEEDS: Forward = 1.42, 1.87, 2.36, 2.95, 4.16. 5.46, 6.88, 8.61 , 12.13, 15.93, 20,05, 25.10 km/h, Reverse = 1.37, 4.00, 11.68 km/h on 16.9x 30 rear tyres.
STANDARD TYRES: Front = 7.50 x 16, Rear = 16.9 x 30.
GROUND CLEARANCE: 438 mm.
TURNING RADIUS: With brakes = 3.85 m, Without brakes = 4.65 m.
OVERALL DIMENSIONS: Length = 3,435 mm, Width = 2,000 mm, Height to highest point of cab = 2,490 mm, Tread = Front = 1,500 to 1,925 mm, Rear = 1,500 to 2,000 mm.
WEIGHT: (As sold without ballast): 2,450 kg.
BELT PULLEY: Diameter = 250 mm, Width = 150 mm, Speed = 1,404 r/min at 2,500 engine r/min, 18.37 m/sec.
PTO: Standard pto speeds = 540 r/min, Engine speed at standard pto speed = 2,260 r/min, pto power at standard pto speed. 38.2 kW, Spline shaft diameter = 35 mm, Shaft central between wheels, rotation clockwise viewed from rear.
HYDRAULICS: Pump capacity: 410 ml/sec, Maximum pressure = 18.62 MPa, number of remote outlets. = 1.
IMPLEMENT ATTACHMENT: 3 point linkage, Category 1 & 2, Maximum lift at hitch point = 1,600 kg.
APPROVED CAB OR ROPS ROLLBAR: Official noise rating 85 dBA.
STANDARD EQUIPMENT: Power steering, Ground speed P.T.O.
OPTIONS AVAILABLE: Remote control valve, Weights, Belt pulley, Creeper speeds, Cab, Air conditioning.
FIAT 580DT
MAX DRAWBAR POWER: 32.9 kW (44.2 hp) at 2700 engine r/min.
MAX DRAWBAR PULL: 39.5 kN at 2.6 km/h on 16.9R x 30 tyres when tractor weighted to 4,176 kg.
STANDARD TYRES: Front = 11.2 x 24 x 6, Rear = 16.9 x 30 x 6, Ground clearance = 470 mm.
TURNING RADIUS: With brakes = 3.65 m, Without brakes = 4.65 m.
OVERALL DIMENSIONS: Length = 3,435 mm, Width = 2,000 mm, Height to highest point of exhaust muffler = 2,516 mm, Tread = front = 1,634 to1,955 mm, Rear = 1,500 to 2,000 mm.
WEIGHT: (As sold without ballast): 2,460 kg.
NOTE: Other details as for 580.
Brochure
MAX POWER AT ENGINE CRANKSHAFT: 42.92 kW (58 hp) at 2,650 engine r/min.
MAX POWER AT PTO SHAFT: 38.4 kW (51.6 hp) 630 r/min at 2,700 engine r/min.
MAX DRAWBAR POWER: 32.4 kW (43.4 hp) at 2,700 engine r/min.
MAX DRAWBAR PULL: 28.6 kN at 3.6 km/h on 16.9 R x 30 tyres when tractor weighted to 4,178 kg.
MAX CRANKSHAFT TORQUE (Nm): 179 at 1,700 engine r/min.
ENGINE: Fiat 8035, Cylinders = 3, Bore = 103 mm, Stroke = 110 mm, Displacement = 2,750 cm3, Compression ratio = 17:1.
TRANSMISSION: Type = constant/synchro.
STANDARD SPEEDS: Forward = 1.42, 1.87, 2.36, 2.95, 4.16. 5.46, 6.88, 8.61 , 12.13, 15.93, 20,05, 25.10 km/h, Reverse = 1.37, 4.00, 11.68 km/h on 16.9x 30 rear tyres.
STANDARD TYRES: Front = 7.50 x 16, Rear = 16.9 x 30.
GROUND CLEARANCE: 438 mm.
TURNING RADIUS: With brakes = 3.85 m, Without brakes = 4.65 m.
OVERALL DIMENSIONS: Length = 3,435 mm, Width = 2,000 mm, Height to highest point of cab = 2,490 mm, Tread = Front = 1,500 to 1,925 mm, Rear = 1,500 to 2,000 mm.
WEIGHT: (As sold without ballast): 2,450 kg.
BELT PULLEY: Diameter = 250 mm, Width = 150 mm, Speed = 1,404 r/min at 2,500 engine r/min, 18.37 m/sec.
PTO: Standard pto speeds = 540 r/min, Engine speed at standard pto speed = 2,260 r/min, pto power at standard pto speed. 38.2 kW, Spline shaft diameter = 35 mm, Shaft central between wheels, rotation clockwise viewed from rear.
HYDRAULICS: Pump capacity: 410 ml/sec, Maximum pressure = 18.62 MPa, number of remote outlets. = 1.
IMPLEMENT ATTACHMENT: 3 point linkage, Category 1 & 2, Maximum lift at hitch point = 1,600 kg.
APPROVED CAB OR ROPS ROLLBAR: Official noise rating 85 dBA.
STANDARD EQUIPMENT: Power steering, Ground speed P.T.O.
OPTIONS AVAILABLE: Remote control valve, Weights, Belt pulley, Creeper speeds, Cab, Air conditioning.
FIAT 580DT
MAX DRAWBAR POWER: 32.9 kW (44.2 hp) at 2700 engine r/min.
MAX DRAWBAR PULL: 39.5 kN at 2.6 km/h on 16.9R x 30 tyres when tractor weighted to 4,176 kg.
STANDARD TYRES: Front = 11.2 x 24 x 6, Rear = 16.9 x 30 x 6, Ground clearance = 470 mm.
TURNING RADIUS: With brakes = 3.65 m, Without brakes = 4.65 m.
OVERALL DIMENSIONS: Length = 3,435 mm, Width = 2,000 mm, Height to highest point of exhaust muffler = 2,516 mm, Tread = front = 1,634 to1,955 mm, Rear = 1,500 to 2,000 mm.
WEIGHT: (As sold without ballast): 2,460 kg.
NOTE: Other details as for 580.