PORTAL
FORUM
Forumlar
Giriş yap
Kayıt ol
Neler Yeni?
Ara
Ara
Sadece başlıkları ara
Kullanıcı:
Forumlar
Menü
Giriş yap
Kayıt ol
Uygulamayı yükle
Yükle
FORUM
Traktörler
Steyr
Teknik Bilgiler-Yorumlar
8073 mü fıat 640 mı
JavaScript devre dışı. Daha iyi bir deneyim için, önce lütfen tarayıcınızda JavaScript'i etkinleştirin.
Çok eski bir web tarayıcısı kullanıyorsunuz. Bu veya diğer siteleri görüntülemekte sorunlar yaşayabilirsiniz..
Tarayıcınızı güncellemeli veya
alternatif bir tarayıcı
kullanmalısınız.
Konuya cevap ver
Mesaj
<blockquote data-quote="okkangal" data-source="post: 180761" data-attributes="member: 470"><p><strong>Ynt: 8073 mü fıat 640 mı</strong></p><p></p><p>FIAT 640</p><p></p><p></p><p>MAX POWER AT ENGINE CRANKSHAFT (kW): 47.72 (64 hp) at 2,400 engine rpm.</p><p>MAX POWER AT PTO SHAFT (kW): 46.31 (62 hp) (659 rpm) at 2,400 engine rpm.</p><p>MAX POWER AT DRAWBAR (kW): 39.45 (53 hp).</p><p>MAX CRANKSHAFT TORQUE: 212 Nm at 1,600 engine rpm.</p><p>ENGINE: Fiat model 8045, 4 stroke, Direct injection diesel, Cylinders = 4, Bore = 100 mm, Stroke = 110 mm, Displacement = 3,456 cc, Compression ratio = 17:1, Operating speed range = 650 to 2,400 rpm.</p><p>TRANSMISSION: Type = Combination constant and synchromesh.</p><p>STANDARD SPEEDS: Forward = 2.5, 3.8, 5.4, 7.1, 9.0, 13.5, 19.0, 26.0</p><p>km/h, Reverse = 3.6, 13.0 km/h, on 16.9 x 30 rear tyres.</p><p>STANDARD TYRES: Front = 7.50 x 16 x 6 ply, Rear = 16.9 x 28 x 6 ply.</p><p>TURNING RADIUS: 3.30 m (with brakes), Ground. clearance = 510 mm.</p><p>OVERALL DIMENSIONS: Length = 3,175 mm, Height (to top of radiator) = 1,430 mm, Tread, Front = 1,320 to 2,015 mm, Rear = 1,300 to 2,000 mm, Wheelbase = 2,070 mm.</p><p>WEIGHT (as sold, without ballast): 2,074 kg.</p><p>BELT PULLEY: Diameter = 250 mm, Width = 150 mm, Speeds = 1,248 rpm at 2,400 engine rpm, 16.3 metres/second.</p><p>PTO: Standard speed = 540, Engine rpm at standard pto speed = 1,970, Pto power at standard pto speed (kW) = 41.39, Spline shaft diameter = 34.9 mm, Shaft central between wheels, Rotation clockwise viewed from rear.</p><p>HYDRAULICS: Reservoir capacity-trans oil, Pump capacity 21.8 I/min, Maximum pressure = 14.72 MPa, Number of remote outlets = 1.</p><p>IMPLEMENT ATTACHMENT: 3 point linkage, Category 1 and 2 linkage, Maximum lift at hitch point = 1,850 kg, Front, Mid, Rear mounting pads.</p><p>CABIN OR ROLLBAR: Combination Rollbar/canopy.</p><p>ADDITIONAL EQUIPMENT AVAILABLE: Alternative tyre and wheel equipment, Weights, Remote control valve, Linkage drawbar, Belt pulley, Down swept exhaust, Power steering, Front tow hook, High speed pto, Super comfort seat.</p></blockquote><p></p>
[QUOTE="okkangal, post: 180761, member: 470"] [b]Ynt: 8073 mü fıat 640 mı[/b] FIAT 640 MAX POWER AT ENGINE CRANKSHAFT (kW): 47.72 (64 hp) at 2,400 engine rpm. MAX POWER AT PTO SHAFT (kW): 46.31 (62 hp) (659 rpm) at 2,400 engine rpm. MAX POWER AT DRAWBAR (kW): 39.45 (53 hp). MAX CRANKSHAFT TORQUE: 212 Nm at 1,600 engine rpm. ENGINE: Fiat model 8045, 4 stroke, Direct injection diesel, Cylinders = 4, Bore = 100 mm, Stroke = 110 mm, Displacement = 3,456 cc, Compression ratio = 17:1, Operating speed range = 650 to 2,400 rpm. TRANSMISSION: Type = Combination constant and synchromesh. STANDARD SPEEDS: Forward = 2.5, 3.8, 5.4, 7.1, 9.0, 13.5, 19.0, 26.0 km/h, Reverse = 3.6, 13.0 km/h, on 16.9 x 30 rear tyres. STANDARD TYRES: Front = 7.50 x 16 x 6 ply, Rear = 16.9 x 28 x 6 ply. TURNING RADIUS: 3.30 m (with brakes), Ground. clearance = 510 mm. OVERALL DIMENSIONS: Length = 3,175 mm, Height (to top of radiator) = 1,430 mm, Tread, Front = 1,320 to 2,015 mm, Rear = 1,300 to 2,000 mm, Wheelbase = 2,070 mm. WEIGHT (as sold, without ballast): 2,074 kg. BELT PULLEY: Diameter = 250 mm, Width = 150 mm, Speeds = 1,248 rpm at 2,400 engine rpm, 16.3 metres/second. PTO: Standard speed = 540, Engine rpm at standard pto speed = 1,970, Pto power at standard pto speed (kW) = 41.39, Spline shaft diameter = 34.9 mm, Shaft central between wheels, Rotation clockwise viewed from rear. HYDRAULICS: Reservoir capacity-trans oil, Pump capacity 21.8 I/min, Maximum pressure = 14.72 MPa, Number of remote outlets = 1. IMPLEMENT ATTACHMENT: 3 point linkage, Category 1 and 2 linkage, Maximum lift at hitch point = 1,850 kg, Front, Mid, Rear mounting pads. CABIN OR ROLLBAR: Combination Rollbar/canopy. ADDITIONAL EQUIPMENT AVAILABLE: Alternative tyre and wheel equipment, Weights, Remote control valve, Linkage drawbar, Belt pulley, Down swept exhaust, Power steering, Front tow hook, High speed pto, Super comfort seat. [/QUOTE]
Alıntı ekle…
İnsan doğrulaması
Cevapla
FORUM
Traktörler
Steyr
Teknik Bilgiler-Yorumlar
8073 mü fıat 640 mı
Bu site çerezler kullanır. Bu siteyi kullanmaya devam ederek çerez kullanımımızı kabul etmiş olursunuz.
Kabul
Daha fazla bilgi edin…
Üst
Alt
