FIAT 211R STANDARD
MAX HP AT ENGINE CRANKSHAFT: 21.13 at 2,300 engine rpm.
MAX HP AT BELT: 19.31 at 2,300 engine rpm.
MAX HP AT DRAWBAR: 18.43 at 2,300 engine rpm.
MAX DRAWBAR PULL: 2,394 lb at 1.53 mph, on 9 x 24 tyres.
ENGINE: Vertical in-line, 4-stroke diesel, Water-cooled, Overhead valves, Cylinders = 2, Bore = 3.347 in. Stroke = 3.937 in. Displacement = 69.5 cu. in. Compression ratio = 21.5:1, Rated speed = 2,300 rpm.
TRANSMISSION: Type = Sliding gears.
STANDARD SPEEDS: Forward = 1.25, 2.12, 3.5, 4.78, 8.14, 13.15 mph, Reverse = 2.23, 7.23 mph, on 9 x 24 rear tyres.
STANDARD TYRES: Front = 4.00 x 15, Rear = 9 x 24.
TURNING RADIUS: 10.16 ft, Ground clearance = 20in.
OVERALL DIMENSIONS: Length =102-3/8 in. Width = 47-5/8 to 75-1/4 in. Height (to top of radiator) = 511 in. Tread, Front = 41-1/4 to 65 in. Rear = 39-3/8 to 67 in.
WEIGHT: 2,000 lb (operating).
BELT PULLEY: Diameter = 8-1/4 in. Width = 4-3/4 in. Speeds =1,460 rpm.
PTO: Spline shaft diameter =1-3/8 in.
ELECTRICS: 12 volts.
HYDRAULICS: Max. pressure = 1,564 psi.
IMPLEMENT ATTACHMENT: 3 point linkage.
